Rear Wheel Alignment

Rear Toe Adjustment

Important: Complete the left and right rear toe adjustments separately, per wheel. Using the following procedure.





1. Loosen the inner adjustment link cam nut (2).

Notice: Refer to Fastener Notice in Service Precautions.

2. In order to adjust the toe, rotate the cam bolt.
Tighten the cam nut to 75 Nm (55 ft. lbs.).
3. Tighten the tie rod nut.
Tighten the tie rod nut to 64 Nm (47 ft. lbs.).
4. Recheck the toe setting after tightening.
5. Readjust the toe setting if necessary.