Keyless Entry Receiver: Service and Repair
REMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENTREMOVAL PROCEDURE
1. Remove the instrument panel (IP) cluster (3).
2. Disconnect the electrical connector (2).
3. Disengage the remote control door lock receiver retainers. Remove the remote control door lock receiver (1).
INSTALLATION PROCEDURE
1. Install the remote control door lock receiver (1). Make sure the retainers are fully seated.
2. Connect the electrical connector (2).
3. Install the IP cluster (3).
4. Program the transmitter to the new receiver. Refer to Transmitter Programming. Programming and Relearning