Power Window Switch Replacement - Rear Door

Power Window Switch Replacement - Rear Door

Removal Procedure




1. Insert a flat-bladed tool under the front edge of the window switch plate (2).
2. Gently pry the switch plate upwards in order to release the plate from the door trim panel.
3. Slide the switch plate forward in order to release the rear retainer tabs.
4. Disconnect the electrical connector.
5. Remove the switch plate.




6. Gently pry the switch plate away from the tabs on the window switch using a small flat-bladed tool.
7. Remove the switch from the switch plate.

Installation Procedure




1. Snap the power window switch into the switch plate.




2. Connect the electrical connectors.
3. Install the rearward edge of the switch plate into the door trim panel.
4. Press down on the front edge of the switch plate in order to engage the retainer clip.