Fluid Temperature Sensor Replacement

Fluid Temperature Sensor Replacement
Removal Procedure
1. Remove the case side cover. Refer to Case Side Cover Replacement .





2. Remove the end of the wiring harness assembly (2) with fluid temperature sensor (1) from the retaining clip.
3. Disconnect the wiring harness connector from the fluid temperature sensor (1).
4. Remove the fluid temperature sensor (1).

Installation Procedure





1. Connect the wiring harness connector to the fluid temperature sensor (1).
2. Install the wiring harness (2) and fluid temperature sensor (1) into the retaining clip.
3. Install the case side cover. Refer to Case Side Cover Replacement .
4. Fill the transaxle to the proper level. Refer to Fluid Capacity Specifications .
5. Inspect the transaxle fluid level.
6. Inspect for fluid leaks.