Rear Toe Adjustment

Rear Toe Adjustment





1. Important: Complete the left and right rear toe adjustments separately, per wheel. Using the following procedure.

Loosen the inner adjustment link cam nut (2).

2. Notice: Refer to Fastener Notice in Cautions and Notices.

In order to adjust the toe, rotate the cam bolt.
^ Tighten the cam nut to 91 Nm (67 ft. lbs.).
3. Tighten the tie rod nut.
^ Tighten the tie rod nut to 64 Nm (47 ft. lbs.).
4. Recheck the toe setting after tightening.
5. Readjust the toe setting if necessary.