Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2005 >> Rendezvous AWD V6-3.4L VIN E >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair



CRANKSHAFT POSITION (CKP) SENSOR REPLACEMENT (24X CKP SENSOR)

REMOVAL PROCEDURE




1. Turn OFF the ignition.
2. Raise the vehicle on a hoist. Refer to Vehicle Lifting
3. Remove the crankshaft harmonic balancer.
4. Note the routing of the sensor harness before removal.
5. Remove the harness retaining clip (3) with the bolt (4).
6. Disconnect the sensor electrical connector.
7. Remove the sensor bolts (4).
8. Remove the sensor (1).

INSTALLATION PROCEDURE




1. Install the 24X crankshaft position sensor (1) with bolts (4) and the route harness as noted during removal.
2. Install the harness retaining clip (3) with the bolt (4).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 10 N.m (89 lb in).

3. Connect the sensor electrical connector.
4. Install the balancer on the crankshaft.
5. Lower vehicle.
6. Perform the CKP System Variation Learn Procedure. Programming and Relearning
pro multis · About Operation CHARM