Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EGR Valve: Service and Repair



EXHAUST GAS RECIRCULATION (EGR) VALVE REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the electrical connector (1) from the exhaust gas recirculation (EGR) valve (2).




2. Remove the EGR pipe bolt and carefully pull the pipe assembly back.
3. Remove the EGR valve bolts.
4. Remove EGR valve.
5. Remove the EGR valve gasket.
6. Clean and inspect the EGR valve gasket mating surfaces.

INSTALLATION PROCEDURE




1. Install a new EGR valve gasket.
2. Install the EGR valve.
3. Install the EGR valve bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 30 N.m (22 lb ft).

4. Install the EGR pipe to the EGR valve.
5. Install the EGR pipe.

Tighten the bolt to 25 N.m (18 lb ft).




6. Connect the electrical connector (1) to the EGR valve (2).