Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Disconnect/Connect Procedure



BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution.

1. Record all presets and theft codes from the radio.
2. Turn off all the lamps and accessories.
3. Turn the ignition OFF.




4. Remove the battery ground (negative) cable (2) from the battery.

INSTALLATION PROCEDURE




1. Install the battery ground (negative) cable (2) to the battery.

Tighten the battery terminal bolt to 16 N.m (12 lb ft).

NOTE: Refer to Fastener Notice.

IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.

2. Reprogram the radio presets. Refer to Radio Setup.
3. Re-initialize the power sliding doors. Refer to Actuator Control Module - Power Sliding Door (PSD) Programming and Setup.