Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank

Evaporative Emission Hoses/Pipes Replacement - Canister/Fuel Tank

Removal Procedure





1. Remove the fuel tank. Refer to Fuel Tank Replacement (Service and Repair).
2. Disconnect the evaporative emission (EVAP) vapor pipe (7) from the EVAP canister (1), the fill limiter vent valve, and the fuel sender assembly.
3. Remove the EVAP vapor pipe.



Installation Procedure





1. Position the EVAP vapor pipe on the fuel tank.
2. Connect the EVAP vapor pipe (7) to the EVAP canister (1), the fill limiter vent valve, and the fuel sender assembly.
3. Install the fuel tank. Refer to Fuel Tank Replacement (Service and Repair).