Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2008 >> Lucerne V6-3.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair >> Fuel Tank Pressure Sensor Replacement (RPO NT7)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor Replacement (RPO NT7)



Fuel Tank Pressure Sensor Replacement (RPO NT7)

Removal Procedure




1. Remove the rear compartment liner. Refer to Rear Compartment Trim Panel Replacement (Service and Repair).
2. Remove the fuel sender access hole cover bolts.
3. Remove the fuel sender access hole cover.




4. Disconnect the fuel level sensor wiring harness electrical connector (1) fuel tank pressure sensor.
5. Remove the fuel tank pressure sensor.


Installation Procedure




1. Install the fuel tank pressure sensor.
2. Connect the fuel level sensor wiring harness electrical connector (1) to the fuel tank pressure sensor.




3. Place the fuel sender access hole cover into position.

Notice: Refer to Fastener Notice (Fastener Notice).

4. Install the fuel sender access hole cover bolts.

Tighten the bolts to 2 N.m (18 lb in).

5. Install the rear compartment liner. Refer to Rear Compartment Trim Panel Replacement (Service and Repair).

pro multis · About Operation CHARM