Power Steering Fluid Reservoir Inlet Hose Replacement

Power Steering Fluid Reservoir Inlet Hose Replacement

Removal Procedure

1. Install drain pans under the vehicle as needed.
2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.




3. Loosen the power steering fluid reservoir inlet hose clamp (1) and disconnect the power steering fluid reservoir inlet hose (2) from the remote power steering fluid reservoir.




4. Loosen the power steering fluid reservoir inlet hose clamp (1) and disconnect the power steering fluid reservoir inlet hose (2) from the power steering return hose.
5. Disconnect the power steering fluid reservoir inlet hose from any retainers and remove it from the vehicle.

Installation Procedure

1. Position the power steering fluid reservoir inlet hose to the vehicle.




2. Connect the power steering fluid reservoir inlet hose (2) to the power steering return hose and release the power steering fluid reservoir inlet hose clamp (1).




3. Connect the power steering fluid reservoir inlet hose (2) to the remote power steering fluid reservoir and release the power steering fluid reservoir inlet hose clamp (1).
4. Clean any excess power steering fluid from the vehicle and remove the drain pans.
5. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (Service and Repair).