Fluid - A/T: Service and Repair

Transmission Fluid Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the fluid level drain plug (1).
3. Drain transmission fluid into a suitable container.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the fluid level hole plug (1) and tighten to 12 Nm (106 lb in).

Installation Procedure




1. Lower the vehicle.
2. Remove the fluid fill cap (1).
3. Fill the transmission to the proper level with the correct fluid.
4. Install the fluid fill cap (1).