Rear Camber Adjustment

Rear Camber Adjustment




1. Loosen the upper control arm-to-frame fastener enough to allow movement.
Note: The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.

2. Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
3. Snug the upper control arm-to-frame fastener, do not tighten at this time.
4. Reinspect the rear camber specifications and adjust as necessary.

Caution: Refer to Fastener Caution Fastener Caution.

5. Hold the nut and tighten the NEW upper control arm-to-frame bolt.

150 Nm (111 lb ft)

6. Repeat the procedure for the other rear wheel.