Cylinder Head Assembly
Note: DO NOT reuse the old cylinder head bolts.
Cylinder Head Bolt - M8
First Pass 15 Nm (11 lb ft)
Final Pass 75 Degrees
Cylinder Head Bolt - M11
First Pass 30 Nm (22 lb ft)
Final Pass 150 Degrees
Left Sequence:
Right Sequence:
Deck Flatness
Warpage less than 0.05 mm (0.002 in)
Camshaft bearing cap
Left (DI):
Right (DI):
First pass 10 Nm (89 lb in)
Second pass bolts 1-4 Loosen
Final pass bolts 1-4 10 Nm (89 lb in)
Intake manifold Specifications
Exhaust manifold Specifications
Camshaft Gear/Sprocket Specifications