Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2012 >> LaCrosse AWD V6-3.6L >> Repair and Diagnosis >> Starting and Charging >> Battery >> Battery Current Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Current Sensor: Service and Repair




Battery Current Sensor Replacement (V6)

Removal Procedure




1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.
2. Disconnect the body harness electrical connector (2) from the battery current sensor.
3. Remove the negative battery cable frame ground ring terminal nut (3) and detach the negative battery ring terminal.




4. Detach the battery current sensor (2) from the current sensor bracket (3).
5. Slide the sensor from the negative battery cable (1).

Installation Procedure




1. Slide the NEW battery current sensor (2) up onto the battery cable (1).
2. Attach the sensor to the battery current sensor bracket (3).




3. Install the negative battery cable frame ground and tighten nut (3) to 25 Nm (18 lb ft).
4. Connect the body harness electrical connector (2) to the battery current sensor.

pro multis · About Operation CHARM