Cylinder Head Assembly: Specifications
CYLINDER HEAD TORQUE & SEQUENCE
Install NEW cylinder head fasteners
Cylinder Head Bolt
First Pass 30 Nm (22 lb ft)
Final Pass 155 degrees
Cylinder Head Front Bolts (4) 35 Nm (26 lb ft)
SURFACE VARIATION
Cylinder Head
Surface Flatness - Block Deck
Longitude 0.050 mm (0.002 in)
Overall 0.1 mm (0.004 in)
Transverse 0.030 mm (0.0012 in)
CAMSHAFT BEARING CAP
Camshaft Cap Bolt 10 Nm (89 lb in)
Camshaft Gear/Sprocket Bolt Specifications
Intake Manifold Specifications
Exhaust Manifold Specifications