Blower Replacement - Ventilation Heat and Cool - Rear Seat Back
BLOWER REPLACEMENT - VENTILATION HEAT AND COOL - REAR SEAT BACKREMOVAL PROCEDURE
1. Remove the rear seat back cover and pad.
2. Carefully pull the ventilation heat and cool blower (3) away from the seat back foam to release the hook and loop material.
3. Pull the duct (2) out of the opening in the seat back foam (1).
INSTALLATION PROCEDURE
1. Position the ventilation heat and cool blower assembly (3) to the seat back foam.
2. Align the duct (2) to the opening in the seat back foam.
3. Push the ventilation heat and cool blower assembly (3) into the seat back foam (1) in order to secure the ventilation heat and cool blower to the hook and loop material.
4. Install the rear seat cover and pad.