Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac Truck >> 2004 >> Escalade/ESV AWD V8-6.0L VIN N >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor >> Service and Repair >> Heating, Ventilation and Air Conditioning >> Blower Motor Replacement (Delphi)

Blower Motor Replacement (Delphi)

BLOWER MOTOR REPLACEMENT (DELPHI)

REMOVAL PROCEDURE




1. If equipped, remove the sound insulator panel.
2. Remove the blower motor insulating cover screws.
3. Disconnect the electrical connector from the blower motor.
4. Remove the blower motor insulating cover.




5. Pull the retaining tab down while turning the blower motor counter clockwise in order to disengage the blower motor from the heater/ventilation module.




6. Remove the blower motor.

INSTALLATION PROCEDURE




1. Install the blower motor.




2. Install the blower motor to the heater/ventilation module. Turn the blower assembly clockwise until the retaining tab locks into place.
3. Install the blower motor insulating cover.




4. Connect the electrical connector to the blower motor.
5. Install the blower motor insulating cover screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 1.6 N.m (14 lb in).

6. If equipped, install the sound insulator panel.

pro multis · About Operation CHARM