Alarm Module: Service and Repair

THEFT DETERRENT CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.

CAUTION: Refer to SIR Caution in Service Precautions.

2. Remove the trim covers.
3. Remove the wire harness straps from the wire harness.
4. Disconnect the connector from the theft deterrent control module.
5. Remove the theft deterrent control module.

INSTALLATION PROCEDURE




1. Install the theft deterrent control module.
2. Connect the connector from the theft deterrent control module.
3. Install new wire harness straps to the wire harness assembly.
4. Install the trim covers.
5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.