23. Case Bushing

Removal Procedure

^ Tools Required
- J 8092 Driver Handle
- J 34196-10 Case Bushing Remover/Installer





1. Remove the case rear oil seal (106) (Y-car Only).
2. Remove the case bushing (7) using J 8092 and J 34196-10.

Installation Procedure

^ Tools Required
- J 8092 Driver Handle
- J 34196-10 Case Bushing Remover/Installer
- J 42198 Case Rear Oil Seal Installer





1. Install a case bushing (7) using J 8092 and J 34196-10.
2. Install a case rear oil seal (106) (Y-car Only) using J 42198.