| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| 4 Speed | 3.7 | 2.4 | B | |
| Note |
| To Check Shim Selection Only, Add | 0.9 | 0.6 | B | |
| To Replace Ring Gear, Add | 0.7 | 0.4 | B | |
| To Replace Side Gears & Pinions, Add | 0.7 | 0.4 | B | |
| To Replace Axle Housing Side Bearings, Add | 1.1 | 0.8 | B | |
| To Replace Axle Case Half, Add | 1.7 | 1.2 | B | |
| To Replace Shifter Forks and/or Interlock, Add | 0.8 | 0.5 | B | |
| To Replace Shifter Shaft, Add | 0.7 | 0.4 | B | |
| To Replace Input Shaft Seal, Add | 0.5 | 0.3 | B | |
| To Replace Input Shaft Bearing and/or O-Ring, Add | 0.7 | 0.4 | B | |
| To Overhaul Input Shaft, Add | 1.5 | 1.1 | B | |
| To Replace Speedometer Drive Gear, Add | 0.7 | 0.4 | B | |
| To Overhaul Output Shaft, Add | 1.8 | 1.3 | B | |
| To Replace Trans Case Half, Add | 1.5 | 1.1 | B | |
| To Replace Bell Housing, Add | 1.1 | 0.8 | B | |
| Overhaul/Rebuild |
| 4 Speed | 7.6 | 5.4 | A | |