A-6 Addressing Problem

Chart A-6:

OSM Adress Error:

DESCRIPTION:

Code L207 indicates loss of power to an address pin on OSM #7. When OSM #7 loses power to pin D, its address is the same as OSM #3. Loss of power to pin E makes the OSM #7 address the same as that of OSM #5, and loss of power to pin F makes the OSM #7 address the same as that of OSM #6. When the BCM sends a command to an address on the data line and two OSM's try to respond, the result is a lighting fault. During such an address failure, when the BCM sends a command on the data line to the address of OSM #7 (the mis-addressed OSM), there is no response by any of the OSM's which also results in a lighting fault. The table below lists the CCDIC messages and symptoms of these conditions.

CCDIC MESSAGES:

L207 AND L203:
1. Right Brake/Turn/Tail Lamps Out

L207 AND L205:
1. Right Brake/Turn/Tail Lamps Out
2. Right Door Courtesy Lamp Out
3. Left Door Courtesy Lamp Out
4. Stow/Dash Courtesy Lamp Out

L207 AND L206:
1. Right Brake/Turn/Tail Lamps Out

SYMPTOMS:

L207 AND L203:
1. Two right turn lamps come on with operation of left turn signal.
2. Right turn signal and hazard indicators do not flash.

L207 AND L205:
1. Interior lamps will not come on when door is opened nor when LCP switch is pressed.
2. Two outer right brake/ turn/tail lamps out.
3. Right turn signal and hazard indicators do not flash.

L207 AND L206:
1. All right rear lamps out.
2. Only left turn signal lamp on with hazard function.
3. Right turn signal and hazard indicators do not flash.