Snapshot

PCM SNAPSHOT
The PCM snapshot mode gives you the ability to retrieve data when the trouble code was set or select data upon request.

PCM CODE SNAPSHOT
The code snapshot will display the parameters of the last code stored. After ".7.0" is displayed on the FDC, the code snapshot parameters can be recalled and displayed by first depressing the "LO" button. When "E.9.0" appears on the FDC, depress the "ECON" and "WARMER" buttons at the same time. The trouble code that the parameters are stored for will appear on the FDC. The "HI" and "LO" buttons can be used to select the desired parameter information. The parameter information will be prefixed with the letter L. Example: L.0.1 would be the TPS parameter when the code was set.

PCM SNAPSHOT
This snapshot can be used to capture parameter data. Enter PCM diagnostics, and selecting PCM data "E.9.0" on the FDC. To capture the data, depress the "ECON" and "COOLER" buttons at the same time. "S.9.0" will appear on the FDC when the data is captured. The "HI" and "LO" buttons can be used to select the desired parameter information. The parameter information will be prefixed with the letter S. Example: S.0.1 would be the TPS parameter when the data was captured.