Transaxle Mount Replace - Left Side

Refer to the image when removing and installing left transaxle mount.

1. Install engine support fixture tool No. J-28467, or equivalent, then raise transaxle side of powertrain 1 inch (25 mm) above its resting screws.

2. Raise and support vehicle, then remove front wheel assembly.

3. Disconnect RSS position sensor from lower ball stud.

4. Remove forward splash shield.

5. Remove frame to mount nuts, then bracket to transaxle bolts.

6. Reverse procedure to install. Torque nuts and bolts to 35 ft. lbs.