Transaxle Mount Replace - Right Side

Refer to the image when removing and installing right transaxle mount.

1. Install engine support fixture tool No. J-28467, or equivalent. Raise passenger side of powertrain 25 mm or 1 inch above resting position with adjusting screws.

2. Raise and support vehicle, then remove right front wheel assembly.

3. Remove frame to mount nuts. Mount should pull away from frame.

4. Remove transaxle mount.

5. Remove bracket to transaxle bolts, then bracket.

6. Reverse procedure to install. Torque nuts and bolts to 35 ft. lbs.