Reprogramming RKE Module

TOOLS REQUIRED
Scan Tool

IMPORTANT: The order that the transmitters are programmed is important. Program transmitter #1 first. Program transmitter #2 second. You may program up to 4 transmitters. Additional transmitters are available that do not have a number on them. Any previously programmed transmitters which were not included in the programming will no longer function with this receiver. The number on the transmitters are for reference only. Transmitter #2 can be programmed as transmitter #1 or vice versa. Use care in order to correctly program the transmitters.

Complete the following steps:
1. Connect a Scan Tool.
2. Select diagnostics.
3. Select body code.
4. Select body style code.
5. Select other.
6. Select remote function actuator (RFA).
7. Select special functions.
8. Select F0 program key fobs.
9. Choose the fob number that you wish to program.
10. Follow the screen prompts in order to complete the programming procedure.
11. Press and hold the lock and the unlock buttons on the transmitter being programmed. The door locks will cycle. This should take about 15 seconds.
12. Proceed to the next transmitter and repeat steps 1-11 until all of the transmitters are complete.
13. Exit the remote keyless entry (RKE) programming.
14. Disconnect the Scan Tool.
15. Cycle the ignition. Test the transmitters for proper operation.