Control Module Replacement

REMOVAL
1. Remove the trunk front trim panel.
2. Access the rear electronics compartment.
3. Disconnect the electrical connectors from the Continuously Variable Road Sensing Suspension (CVRSS) control module.
4. Remove the CVRSS control module from the right electronics bay.





INSTALLATION
1. Install the CVRSS control module in the right electronics bay.
2. Connect the electrical connectors to the CVRSS control module.
3. Close the rear electronics compartment.
4. Install the trunk front trim panel.
5. Perform the CVRSS Control Module Calibration.
6. Perform the Automatic Level Control (ALC) Trim Height Adjustment.