Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Main Bearing Cap Torque
Tighten the lower crankcase bolts in proper sequence.
First Pass
Tighten the lower crankcase bearing bolts (numbers 1 through 20) to 20 Nm (15 lb ft) in the proper sequence.
Final Pass
Tighten the lower crankcase bolts (numbers 1 through 20) an additional 65 degrees in the proper sequence using the J 36660-A.
Tighten the upper to lower crankcase perimeter bolts (numbers 1 through 8) to 30 Nm (22 lb ft).