Right (RHD)

[1][2]Blower Control Module Replacement (RHD)


REMOVAL PROCEDURE




1. Remove the left sound insulator.
2. Remove the IP compartment.
3. Remove the dash integration module from the bracket.
4. Remove the two rear dash integration module bracket screws.
5. Reposition the dash integration module bracket to gain access to the [1][2]blower control module.




6. Disconnect the [1][2]blower control module electrical connector.




7. Remove the [1][2]blower control module retaining screw.
8. Remove the [1][2]blower control module.

INSTALLATION PROCEDURE




1. Install the [1][2]blower control module.
2. Install the [1][2]blower control module retaining screw.




3. Connect the [1][2]blower control module electrical connector.




4. Install the dash integration module bracket and screws.
5. Install the dash integration module.
6. Install the IP compartment.
7. Install the left sound insulator.