Hazard Warning Lamps

Fuse #12 supplies B+ to the hazard warning switch at all times. When the hazard warning switch is pressed to the ON position, pulsating voltage is supplied from the [1][2]turn signal lamp flasher K10 to the LH and RH turn indicators, to the LH and RH park/turn signal lamps and to the LH and RH rear turn signals through the hazard warning switch. The LH and RH turn indicators are permanently grounded within the instrument cluster to G103. The LH and RH park/turn signal lamps are permanently grounded to G103. The LH and RH rear turn signals are permanently grounded to G400.