Sec Air Cutoff Valve Vacuum Solenoid Replacement

REMOVAL PROCEDURE
1. Disconnect the AIR cutoff valve vacuum control solenoid electrical connector.
2. Disconnect the vacuum hoses observing the proper positions.
3. Remove the solenoid bolts and remove the solenoid (3) from the bracket.

INSTALLATION PROCEDURE
1. Install the solenoid to the bracket with the solenoid bolts.

Tighten
Tighten the bolts to 4 N.m (35 lb in).

2. Connect the vacuum hoses in the correct positions.
3. Connect the solenoid electrical connector.