Rear Door Weatherstrip Replacement

Rear Door Weatherstrip Replacement

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover


Removal Procedure





1. With the door open, start at the front upper corner of the door, at the locator pin (1), working rearward pull the weather-strip away from the door flange.
2. Use the J 38778 to carefully remove the retainers from the bottom half of the door.
3. Remove the weatherstrip from the door.



Installation Procedure





1. Push locator pins (1) into the upper front corner and rear window corner of the door.
2. Working rearward along the top install the weatherstrip into the flange.
3. Install the retainers to the bottom half of the door.