Instrument Panel (IP) - Endcap Replacement - Left

REMOVAL PROCEDURE
1. Insert flat bladed tool between the IP endcap (1) and the IP and pull out on the IP endcap (1) while leashing the retainer (2) with the flat bladed tool.
2. Slide the left IP end cap (1) out of the tabs at the front edge of the IP and remove the endcap (1).

INSTALLATION PROCEDURE
1. Align the tabs on the front edge of the left IP end cap (1) to the slots in the IP.
2. Push towards the IP in order to engage the IP end cap (1) retainer (2).