Cassette Functions

TAPE
In order to toggle between TAPE and the radio, press AM, FM1, or FM2 to play the radio. Press TAPE in order to return to the tape function.

EJECT
Press EJECT in order to remove the tape. This button functions even if the radio is OFF or the key is out of the ignition.

FORWARD and REVERSE
Push FWD in order to move forward rapidly to another part of the tape. Push REV in order to move backward to another part of the tape. In order to stop the tape FWD or REV, push the same button lightly. The radio plays during the fast forward or the reverse mode.

SEEK
Press the SEEK button for the next or the previous selection. SEEK appears for the next selection. REP appears for the previous selection. Observe a 3 second gap for proper operation. The tape direction arrow blinks during the SEEK operation. The audio is muted during SEEK.

SCAN
Press SCAN in order to listen to selections for a few seconds. SCAN lights in the display until the next selection is found, then PLAY appears in the display. Press SCAN again in order to stop scanning. The audio mutes during the SCAN operation.

SIDE
Press SIDE in order to play the other side of the tape. This function causes the tape to reverse.