Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2000 >> Seville SLS V8-4.6L VIN Y >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair >> Ignition Control Module Replacement - Bank 2
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module Replacement - Bank 2

REMOVAL PROCEDURE

Locations View:




1. Remove the engine sight shield retaining bolts and the engine sight shield.
2. Disconnect the ignition control module electrical connector.
3. Remove the engine oil level indicator.




4. Using the removal sequence, remove the ignition assembly retaining bolts.
5. Carefully, remove the ignition assembly.




6. Remove the ignition control module retaining screws.
7. Remove the ignition control module.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service and Precautions.




1. Install the ignition control module.

Tighten
Tighten the ignition control module retaining screws to 0.8 N.m (7 lb in).

IMPORTANT: Be sure the ignition assembly grounding spring and insulator are in place when installing the ignition assembly.

2. Connect the spark plug boots to the spark plugs. Carefully, install the ignition assembly.




3. Install the ignition assembly retaining bolts.

Tighten
Using the installation torque sequence, tighten the ignition assembly retaining bolts to 9 N.m (80 lb in).

4. Reconnect the ignition assembly electrical connector.
5. Install the engine sight shield and retaining bolts.

Tighten
Tighten the engine sight shield retaining bolts to 8 N.m (70 lb in).

6. Install the engine oil level indicator.
pro multis · About Operation CHARM