Keyless Entry Receiver: Service and Repair

REMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT

REMOVAL PROCEDURE




1. Remove the rear seat back.
2. Disconnect the electrical connector.
3. Depress the locking tabs in order to remove the remote control door lock receiver (1) from the electronics bay board.
4. Remove the remote control door lock receiver.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the remote control door lock receiver.
2. Snap the remote control door lock receiver (1) onto the electronics bay board.
3. Ensure the locking tabs are secure.
4. Install the rear seat back.
5. Reprogram the transmitters. Programming and Relearning