Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2001 >> Eldorado Touring V8-4.6L VIN 9 >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair >> Ignition Control Module Replacement - Bank 1
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Ignition Control Module Replacement - Bank 1

REMOVAL PROCEDURE




1. Remove the fuel injector sight shield.
2. Disconnect the ignition control module electrical connector.
3. Remove the ignition coil cassette.
4. Remove the ignition control module retaining screws.
5. Remove the ignition control module.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the ignition control module.

Tighten
Tighten the ignition control module retaining screws to 0.8 N.m (7 lb in).

IMPORTANT: Be sure the ignition cassette grounding spring and insulator are in place when installing the ignition cassette.

2. Connect the spark plug boots to the spark plugs.
3. Carefully, install the ignition cassette.
4. Reconnect the ignition cassette electrical connector.
5. Install the fuel injector sight shield.

pro multis · About Operation CHARM