Instrument Panel (IP) - Outer Trim Cover Replacement - Right

Instrument Panel (IP) Outer Trim Cover Replacement - Right

Removal Procedure





1. Insert flat bladed tool between the IP outer trim cover (1) and the IP and pull out on the IP outer trim cover (1) while releasing the retainer (2) with the flat bladed tool.
2. Slide the IP outer trim cover (1) out of the tabs on the front edge of the IP and remove the outer trim cover (1).



Installation Procedure





1. Align the tabs on the front edge of the right IP outer trim cover (1) to the slots in the IP.
2. Push the IP outer trim cover (1) towards the IP in order to engage the IP outer trim cover retainer (2).