Night Vision Camera Replacement

REMOVAL PROCEDURE




1. Disconnect the night vision camera (1) electrical connectors (2).




2. Turn the three camera retainers (1) 90 degrees in order to remove the camera from the mounting bracket.
3. Remove the night vision camera.

INSTALLATION PROCEDURE

IMPORTANT: Make sure the retainers are fully turned and in the locked position.




1. Install the night vision camera to the mounting bracket and turn the retainers (1) 90 degrees.




2. Connect the electrical connectors (2).
3. Perform aiming procedure for night vision camera (1). Refer to Night Vision Camera Aiming