Rear Compartment Lid Valet Lock Out Switch Replacement

REMOVAL PROCEDURE

CAUTION: Refer to SIR Caution in Service Precautions.




1. Remove the instrument panel (IP) storage compartment.
2. Squeeze the tabs on each side of the valet switch (1) in order to release the valet switch from the opening in the IP storage compartment.
Push the valet switch out of the storage compartment opening.

INSTALLATION PROCEDURE




1. Install the valet switch (1) in the opening on the IP storage compartment.
2. Push the valet switch (1) firmly in place in order to secure the retaining tabs.
3. Install the IP storage compartment.