With RPO F45

Scan Tool Data Definitions (W/O F45)
Accum Fault-Compressor: A defined period of time that the compressor is active with out an exhaust cycle.
Accum Fault-Exhaust: A defined period of time the exhaust is active with out a compressor cycle.
ALC Compressor Active: Indicates when the compressor is running or not running.
ALC Exhaust Solenoid Active: Indicates when the exhaust solenoid is on or off.
ALC Trimset: This procedure reprograms the RIM with the vehicles ride height specification, per the suspension option.
Battery low compressor: Indicates when there is low voltage at compressor from battery.
Calibration I.D.: This number designates the modules calibration.
Filtered Position Valve: As the vehicle operates the suspension position sensor is monitored, and the information is filtered, to the RIM so it can adjust the suspension.
Leveling Sensor Feed: Voltage feed to the suspension position sensor.
Progress Fault-Compressor: A defined period of time that the compressor is active and no change is detected by the suspension position sensor.
Progress Fault-Exhaust: A defined period of time the exhaust is active and no change is detected by the suspension position sensor.
Prom I.D.: The modules internal "PROM" identifier.
Suspension Position Sensor: Indicates the sensor signal voltage to the control module.
Trim Value: Vehicle trim height value programmed in the RIM.