Power Sunroof Inoperative
POWER SUNROOF INOPERATIVETEST DESCRIPTION
Steps 1 - 6:
Steps 7 - 9:
Steps 10 - 11:
Steps 12 - 17:
Steps 18 - 23:
The numbers below refer to the step numbers on the diagnostic table.
4. This step tests the sunroof switch low reference circuit for an open.
5. This step tests the sunroof switch data 6 circuit for a short to ground.
9. This step tests the sunroof switch for an open.
10. This step tests the sunroof switch for an open.
11. This step tests the sunroof motor control circuits for a short to ground or an open.