Sound Barrier Replacement - Rear Seat Cushion to Floorpan

Sound Barrier Replacement - Rear Seat Cushion to Floorpan

Removal Procedure

1. Remove the rear seat back. Refer toSeat Back Replacement - Rear (Seat Back Replacement - Rear) in Seats.
2. Remove the rear upper body side garnish molding. Refer toGarnish Molding Replacement - Body Side Rear Upper (Garnish Molding Replacement - Body Side Rear Upper) .




3. Remove the push-in (2) securing the sound barrier (1) to the wheelhouse panel.
4. Remove the rear wheelhouse sound barrier from the vehicle.




5. Remove the rear shoulder belts. Refer toSeat Belt Retractor Replacement - Rear in Seat Belts.
6. Remove the center rear shoulder belt. Refer toSeat Belt Retractor Replacement - Center Rear in Seat Belts.
7. Lift the rear floorpan sound barrier upward and pull outward in order to remove.



Installation Procedure


Caution: All floor pan insulator material must meet Federal Vehicle Safety Standards for flammability. Failure to do so could result in personal injury and/or vehicle damage.





1. Position the sound barrier to the floorpan.
2. Position the sound barrier under the rear compartment trim.

Important: Align the sound barrier in order to keep the seat belt and seat attachment areas are clear.


3. Ensure the attachment areas are clear.
4. Route the sound barrier around the electrical harness.
5. Route the sound barrier under the primary weatherstrip on the outside edges.
6. Press firmly in all areas in order to secure the sound barrier to the floorpan.
7. Install the rear shoulder belts. Refer toSeat Belt Retractor Replacement - Rear in Seat Belts.
8. Install the center rear shoulder belt. Refer toSeat Belt Retractor Replacement - Center Rear in Seat Belts.




9. Position the rear seat back sound barrier (1) to the wheelhouse panel.
10. Install the push-in (2) in order to secure the sound barrier.
11. Install the rear upper body side garnish molding. Refer toGarnish Molding Replacement - Body Side Rear Upper (Garnish Molding Replacement - Body Side Rear Upper) .
12. Install the rear seat back. Refer toSeat Back Replacement - Rear (Seat Back Replacement - Rear) in Seats.