Cadillac Deville

1. Remove the rear seat cushion.

2. Remove the cover from the electrical center and remove the SIR fuse.

3. Using tool J-44298, release the spring clips on the rear side of the DRIVER's air bag than attach it to the steering wheel.

4. Disconnect the two air bag electrical connectors and the one horn electrical connector.

5. Remove the air bag.

6. Connect the two air bag connectors and the horn electrical connector to the new air bag.

7. Route the wiring harness as necessary and position the air bag to the steering wheel.

8. Press the air bag to the steering wheel to engage the spring clips.

9. Install the SIR fuse and the cover on the electrical center.

10. Install the rear seat cushion.

11. Turn the ignition switch to the ON position and verify that the AIR BAG indicator flashes seven (7) times and goes out.

12. Install the GM Recall Identification Label.

13. Place the removed air bag in the box that the new air bag came in, tape it shut and mark the box as follows:

"DO NOT DEPLOY -- FOR FURTHER INFORMATION REFER TO RECALL BULLETIN 03008."

To arrange for return of the removed air bag module, contact Autoliv at 800-503-0967 (U.S.), or 248-375-6567 (Canada/Mexico/IPC). An Autoliv representative will make arrangements to pick up and safely dispose of the modules. Store removed modules in an area with limited access.