Window Channel Replacement - Rear Door Front

Window Channel Replacement - Rear Door Front

Removal Procedure

1. Ensure that the window is fully closed.
2. Remove the door trim panel. Refer to Trim Panel Replacement - Side Rear Door Service and Repair
3. Remove the water deflector. Refer to Water Deflector Replacement - Rear Door (Service and Repair).




4. Loosen the lower fasteners (3).
5. Remove the upper fasteners (1).
6. Rotate the top of the front window channel forward.
7. Lift upward on the front window channel in order to disengage the lower bolt from the keyhole slot.
8. Remove the front window channel from the door.



Installation Procedure





1. Install the front window channel into the door, top end first.
2. Insert the lower bolt (3) into the keyhole slot.
3. Rotate the top of the front window channel rearward and align on the lower edge of the window.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the top fastener.

Tighten the front window channel fasteners to 9 N.m (80 lb in).

5. Install the water deflector. Refer to Water Deflector Replacement - Rear Door (Service and Repair).
6. Install the door trim panel. Refer to Trim Panel Replacement - Side Rear Door Service and Repair