46. Crankshaft Balancer Clean and Inspect

Crankshaft Balancer Cleaning and Inspection

Cleaning Procedure
1. Clean the crankshaft balancer in solvent.

Caution: Refer to Safety Glasses Caution in Service Precautions.

2. Dry the crankshaft balancer with compressed air.

Inspection Procedure





1. Inspect the crankshaft balancer for the following:
^ Worn or damaged hub-to-crankshaft surface (1)
^ Worn, grooved, or damaged hub seal surface (2). A crankshaft balancer hub seal surface with excessive scoring, grooves, rust, or other damage must be replaced.
^ Bent, damaged or missing crankshaft front oil seal shield (3)
^ Worn, chunking, or deteriorated rubber between the hub and pulley (4)
^ Damaged drive belt ribs (5)
2. Repair or replace the crankshaft balancer as necessary.