Stop Lamp Switch Replacement (LHD)

STOP LAMP SWITCH REPLACEMENT (LHD)

REMOVAL PROCEDURE




1. Remove the left sound insulator.
2. Disconnect the electrical connectors from the switch.
3. Rotate the stop lamp/ABS/shift lock switch (2) counterclockwise, then pull to remove the switch.

INSTALLATION PROCEDURE
1. Install the stop lamp switch into the retainer.

IMPORTANT: The stop lamp switch is self adjusting when installed properly in the fully locked position. The twist lock type switch requires no further adjustment.




2. Press the switch (2) into the retainer until the switch plunger is fully depressed into the switch barrel.
3. Rotate the switch (2) clockwise until travel has stopped and the switch locks fully into position.
4. Connect the stop lamp/ABS/shift lock switch electrical connectors to the stop lamp switch (2).
5. Install sound insulator.