Child Seat Tether Attachment: Service and Repair
CHILD RESTRAINT TETHER ANCHOR REPLACEMENTREMOVAL PROCEDURE
1. Remove the rear shelf panel.
2. Remove the fastener (1) that retains the child tether anchor (2) that is being serviced.
3. Remove the child tether anchor (2) from the vehicle.
INSTALLATION PROCEDURE
IMPORTANT: During installation ensure that the child tether anchor (1) is installed with the anti rotation tabs firmly seated in the anti rotation holes on the cross car beam. The anti rotation tabs face forward on both the left and the right sides. For the center child tether anchor (1), the anti rotation tabs face the rear of the vehicle
1. Install the child tether anchor (1) to the cross car beam.
2. Install the child tether anchor fastener (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fastener to 30 N.m (22 lb ft).
3. Install the rear shelf panel reinforcement.