Crankshaft End Play Measurement

Crankshaft and Bearings Removal

Tools Required
^ J6125-1B Slide Hammer Adapter
^ J41818 Crankshaft Bearing Cap Remover

Crankshaft End Play Measurement
1. Place a dial indicator at the crankshaft nose.
2. Gently force the crankshaft to the extreme front and rear positions with a pry tool while monitoring the movement of the dial indicator.
3. The crankshaft end play should not exceed specifications. Refer to Engine Mechanical Specifications.
4. If the specifications are exceeded inspect the thrust bearing thrust OD and the crankshaft thrust wall for wear and/or excessive runout. Refer to Engine Mechanical Specifications.
5. Replace the thrust bearing or crankshaft as necessary.