Connecting Rod: Specifications

Connecting Rod Bolt
First Pass 30 Nm (22 ft. lbs.)
Second Pass Back off to zero
Third Pass 25 Nm (8 ft. lbs.)
Final Pass +110 degrees

Connecting Rod Bore Diameter - Bearing End 57.136-57.152 mm (2.2495-2.2501 inch)
Connecting Rod Bore Diameter - Pin End 23.002-23.014 mm (0.9056-0.9061 inch)
Connecting Rod Bore Out-of-Round - Bearing End 0.006 mm (0.0002 inch)
Connecting Rod Bore Out-of-Round - Pin End 0.005 mm (0.0002 inch)
Connecting Rod Length Center to Center 151.00 mm (5.9449 inch)
Connecting Rod Side Clearance 0.200-0.500 mm (0.0079-0.0197 inch)
Connecting Rod Straightness 0.050 mm (0.0020 inch)